How to use your Ultimate Lift Kit

BEFORE YOU GET STARTED

  • Test run

    Apply the test patch included with your kit to your breast/chest and leave it for 24 hours to ensure your skin does not react. Remember your breast skin is different from the rest of your skin, so a skin test elsewhere won’t work.

  • Remove ALL body creams

    Even trace amounts of oil, moisturizing soap, or leftover lotion and tanning creams on the skin can weaken the adhesive.

  • Dry your skin

    Do not apply tape directly after a shower or workout. Your skin needs to be as dry as possible to maximize adhesion.

  • Chill out

    Make sure to apply the Ultimate Lift Kit in a cool environment. Sweating while applying the product can stop the adhesive’s activation and cause the product to peel.

  • One and done

    You can only apply the product once. Do not remove and reapply the product - it won’t work.

  • Step 1:

    Prep your skin as covered in the "Before you get started" section.
    IMPORTANT: Be sure to clean and dry your skin and apply nipple covers.

  • Step 2:

    Peel the backing fi lm off the lower half of your Easy Lifts.
    Take care to make sure the sticky parts don’t touch each other!

Pro Tip

You can apply tape and Easy Lifts laying on your back so that gravity works with you.

  • Step 3:

    Stick the lower half to your boob. It’s is important not to stick the tape at the foot or natural crease of your boob. Instead start the tape higher, just an inch under the nipple cover.

  • Step 4:

    Rub the bottom half onto your skin so it stays put. Then remove the backing fi lm from the top half. Pull it up gently with both hands until you get your desired lift.

Pro Tip

Don’t pull the tape too tight!
Tight tape might cause skin irritation.

Step 4: Continued

Angle your Easy Lifts to help it stay hidden under your clothes.
Then, stick the top half of the Easy Lift to your skin.
Repeat on the other breast.

Pro Tip

If you end up with a few wrinkles in your tape, don’t worry.
Small bumps and wrinkles won’t show under most outfi ts.

  • Step 5: Medium to large boobs

    Still feel like your boobs are drooping and need extra support?
    Sculpt and shape any side boob bulges by applying tape to the sides and / or bottom of your boob.

  •   

    Start from the bottom of your boob, apply the tape, tracing and overlapping the Easy Lift as you lift. Stick the boob tape as high as your top or dress allows. Use two layers of boob tape if you need extra lift and support.

  • Step 5: Continued

    If you rock a G - K cup size, use 2 sets of Easy Lifts. Place the first pair inline with your nipple. Only lift your breast one-half to two-thirds to the desired height with the first pair. Use the second pair to overlap the first pair, lifting your bust to the desired height and securing any side boob bulges.

  • Optional: Extra Cleavage

    Peel and stick one-third of the strip onto the side of your boob.
    Pull your boobs together to get more cleavage as you peel and stick the rest of the backing paper off. Repeat on the other side.

Pro Tip

Don’t skimp on the tape! Bigger busts need more support.
Overlap the tape until your boobs feel like they are floating.

  • Step 6:

    Nearly there! Put your outfit on to see where to trim.
    Peel back and carefully cut any excess tape. Be careful not to cut too low as this may reduce the strength of your lift.

  • Step 7:

    IMPORTANT: You must warm up the Easy Lift and Tape to activate the adhesive! You can rub them vigorously for 30 seconds or use a hairdryer.

Pro Tip

Got extra tape strips? The strips can be used just like the Easy Lift bras.
Just follow the same steps and peel, stick, and lift!

Step 8:

Finish off your look with the double-sided fashion tape to hold your outfit in place. Simply tape it onto the part of your outfit you need to stay put, and peel off the backing strip. Secure to your body exactly where you want the fabric to sit.

Pro Tip

Are you planning to use the Ultimate Lift Kit for a wedding or another important event? Do a trial run a week before so that you know how to best use the product with your boobs. Wear for 2-3 hours as a test run to ensure they don’t irritate your skin.